Signs That Your Garage Door Motor Needs Replaced
Your garage door motor is an essential component as it is what drives the carriage and opens or closes the door whenever you press the button on your remote or type your code into the keypad. When working correctly, the motor should turn on immediately when you signal the door to open or close, and the motor should fully open or close the door within a few seconds. As with any other motor, a garage door opener only has a limited lifespan and can experience various issues that prevent it from working properly. This means that there will always eventually be a time when you need to have your garage door motor replaced, and here are some of the signs that can indicate you need a new garage door motor.
Motor Makes Excessive Noise
A garage door motor will always make some noise, but it shouldn’t be excessively loud or make unusual sounds. If your garage door opener is excessively loud, it usually indicates that the motor is beginning to wear out and is struggling to open and close the door. Grinding, scraping and squealing noises coming from the opener are almost always a sign that the motor is failing and needs to be replaced or possibly repaired. If your garage door motor is much louder than normal or makes any unusual sounds, we would recommend having it inspected as soon as possible.
Garage Door Opens and Closes Slowly
As a garage door motor ages, it will often start to have more difficulties pulling the door open and closed. When the motor is in good condition and working properly, your garage door should fully open or close in around 10 to 15 seconds. If you notice that it starts to take more than 20 to 30 seconds for your garage door to open or close, it’s a fairly good indicator that the motor is wearing out and will need to be replaced.
Garage Door Suddenly Won’t Open or Close
Garage door motors typically fail over time, but there are issues that can cause them to suddenly stop working altogether. If your garage door suddenly won’t open or close, you should first go inside and make sure that the trolley carriage is still connected to the motor and that none of the rollers have come off the rails. You’ll also want to inspect the torsion springs and lift cables for any obvious issues and make sure that nothing is blocking the door. If everything looks as it should and the door still won’t open and close, you’ll want to have the motor inspected. This problem could be related to an electrical in the outlet that the opener is plugged into or it could be that the motor has burnt out and needs to be replaced.
Garage Door Stalls When Opening or Closing
A garage door opener that stalls or only opens or closes the door part of the way before stopping is a fairly common issue. This problem most commonly occurs because the tracks are bent or the rollers are broken. If the rollers and tracks are in good shape and look normal, it may be that the motor is defective and needs to be replaced. In either case, this is a problem that you’ll want to have a professional look at immediately as a garage door that gets stuck can be extremely dangerous and could cause serious injury.
Garage Door Opener Isn’t Always Responsive
Again, your garage door motor should always kick on immediately when you push the button on the remote or use the keypad. If you find that you sometimes have to push the button on your remote several times before the motor responds, the first thing you should do is replace the batteries in the remote. If this doesn’t fix the issue or the motor also sometimes doesn’t respond to the keypad, you will want to have your opener inspected. In most cases, this problem indicates that the motor has some electrical issues and may need to be either repaired or replaced.
Garage Door Opens and Closes on Its Own
A garage door that randomly opens or closes on its own is obviously a serious issue since it could allow anyone to get inside if the door opened while you were away or at night when you’re asleep. The buttons on the keypad or a remote can sometimes get stuck and cause the motor to open or close on its own. However, this problem more commonly indicates that there is an issue with the motor’s circuit board, such as a short circuit. A short circuit can signal the motor to run and cause the door to open or close on its own. If you do ever find that your garage door opens and closes on its own, you should have the motor replaced immediately both for the safety of your family and your home security.
Garage Door Reverses and Reopens After Closing
Another common issue is when a garage door closes and then the motor immediately reverses and reopens the door. This problem most commonly occurs due to some issue with the safety sensors, which work to prevent the door from closing if there is anything in its path. The first thing to do if you ever notice this issue is to make sure that the two sensors are aligned, and then clean the lenses on each sensor. You’ll also want to make sure that nothing is blocking the path between the sensors.
The safety sensors work by sending a beam of light back and forth. If the sensors are misaligned or the lenses are dirty, the beam of light won’t pass between them. This will usually result in the door never fully closing or reopening as soon as it’s closed.
If the sensors are clean and properly aligned and the problem persists, it usually indicates that the motor has electrical issues or worn-out components. In this case, you’ll need to have the motor inspected and repaired or replaced.
Garage Door Opener Is Old and Outdated
On average, a garage door motor will be able to complete around 10,000 open and close cycles before wearing out. This means that the motor will typically last for around 10 to 15 years at the very most depending on how many times you open and close your garage door every day. If your motor is 10 or more years old, we would definitely recommend replacing it as soon as possible even if it is still working correctly.
Older garage door openers aren’t all that secure as many units are programmed with the same access code and this code never changes. This means that thieves can potentially open your garage by using a remote from a different door that has the same model of opener. Newer garage door openers use a rolling access code that changes every time, and this type of opener will only ever work with your remote. By replacing your outdated garage door opener, you can both ensure your garage door works correctly and make your home much more secure.
If you need to have your garage door motor replaced or your garage door needs any repairs, you can trust Garage Door Doctor for help. We specialize in garage door installation and repairs, and we work on both residential and commercial garage doors for customers throughout the Bloomington and Indianapolis areas. For more information or to schedule a garage door inspection, contact us today.